PRODUCTS
Ideal for weed mowing in orchards.
Mowing height can be adjusted with the gauge wheel or roller.
The JD type blades are not easily damaged by stones or brushwood.
Light and manoeuverable enough to mow every nook and corner.
The universal joint is a standard attachment.
Models | FNC-1202-1S | FNC-1402-1S | FNC-1602-1S | FNC-1802-1S | FN1602C-1S | FN1802C-1S | FN2002C-1S |
---|---|---|---|---|---|---|---|
Mowing Width | 1170mm | 1380mm | 1550mm | 1760mm | 1550mm | 1760mm | 1930mm |
HP of Tractor Required | 11~20HP | 18~30HP | 24~35HP | 30~45HP | 26~45HP | 35~50HP | 45~60HP |
No. of Blades | 20 | 24 | 40 | 48 | 40 | 48 | 56 |
Driving System | Side Drive by V-belt | ||||||
Rotor Direction | Up-cut | ||||||
Hight Control | Rear Gauge Wheel | Rear Gauge Roller | |||||
3 Point Hitch Linkage | Cat. 0.1 | Cat. 1 | Cat. 1,2 | ||||
Mounting Position | Center Mounted | ||||||
R.P.M of the Rotor | 1994rpm(PTO 540rpm) | 1865rpm(PTO 540rpm) | 2020rpm(PTO 540rpm) | ||||
Turning Radius | 380mm | ||||||
Rotor Diameter | 420mm | 430mm | 450mm | ||||
Weight | 205kg | 225kg | 265kg | 290kg | 315kg | 405kg | 425kg |
Dimensions(L*W*H) | 1374*1375*1260mm | 1374*1575*1260mm | 1374*1795*1260mm | 1374*1995*1260mm | 990*1810*830mm | 990*2010*830mm | 990*2216*920mm |
Working Speed | 2.0~4.0km/h | ||||||
Efficiency | 17~30min./10a | 14~29min./10a | 13~26min./10a | 12~24min./10a | 13~26min./10a | 12~24min./10a | 11~22min./10a |